Simca 1200S Coupé, 1971 – Restoration of a rare Bertone Coupé

Czech Republic

A French coupé with Italian bodywork

This rare Simca 1200S Coupé came to us from a Prague enthusiast of classic French cars from the 1960s. For this customer, it's already the third restoration project with YOR Youngtimer Oldtimer Restauration. The starting point wasn't straightforward: the car was incomplete, the body had already undergone several earlier restoration attempts, and not all of the previous work meets the standards that such a coupé deserves today. A second donor car is available for spare parts. With a Simca 1200S, this isn't a luxury, but almost a requirement.

The 1200S was built from 1967 to 1971. The body was designed by Bertone, while the mechanical components were based on Simca parts. The water-cooled four-cylinder engine had a displacement of 1204 cc, producing around 80 to 85 hp, depending on the version. For a small, rear-engined coupé, this was a respectable figure in the late 1960s.

Incomplete base and old restoration attempts

This project isn't about a quick paint job. The car first needs to be fully understood. Which parts are missing? Which panels were replaced previously? Which repairs are sound, and which require dismantling? Old restoration attempts, in particular, make the work difficult to estimate, because the true extent of the damage often only becomes clear after the paint, filler, and sealant have been removed.

With car bodies like these, the problems are rarely limited to visible rust on the exterior. Critical areas include seams, sill ends, wheel arches, floor panels, door bottoms, the front end, and the transitions of the Bertone body. If an old piece of sheet metal sounds dull when exposed or yields under a screwdriver, the decision has been made. Instead of preservation, it's cut, fitted, and rebuilt.

The second donor vehicle is therefore crucial. It can supply sheet metal parts, fittings, interior components, trim strips, brackets, hinges, or small technical parts that are difficult or impossible to find on the market. With the Simca 1200S, the availability of spare parts often determines whether a work step is blocked for weeks or months.

Technology, bodywork and parts supply as a long-term project

The restoration is planned to take several years. This is realistic for this vehicle. First, the bodywork and its completeness will be documented, followed by disassembly, comparison with the parts donor, and a decision on which areas will be repaired, replaced, or correctly assembled from two vehicles.

The technical components also require a separate inspection. Engine, gearbox, cooling system, brakes, steering, and electrical system shouldn't just be judged on whether they appear complete. After a long period of inactivity or an uncertain history, compression, leaks, oil circulation, carburetor, cooling system, and electrical wiring are all checked. The 1200S's combination of a rear engine and water-cooled technology is unique enough that a standard Simca solution can't simply be adopted without careful consideration.

Worthiness of restoration of a rare Simca 1200S

Economically, a Simca 1200S Coupé is not a straightforward case. Restoration can quickly cost more than its market value realistically justifies. Nevertheless, this project is understandable because of its rarity, Bertone bodywork, French engineering, and the owner's personal connection to the car. Without a donor vehicle, the calculations would be significantly more difficult.

In the Czech workshops, this coupé is therefore not treated like an ordinary small classic car. The work begins with the car's structure, completeness, and determining which previous modifications can be retained. Only then do the paintwork, interior, and final assembly speak a clear language.

Split:

Here you can find other projects that may be of interest to you:

barkas b1000 restauration 210824 1

Barkas B1000 KB, 1985 – Complete restoration of an East German minibus

Ford Transit 1250 fire engine vintage vehicle restoration (3)

Ford FK 1250 Transit KLF, 1963 – Restoration of a Rosenbauer fire engine

Tatra 52 pre-war classic car inventory (2)

Tatra 52 Limousine, 1934 – Full restoration of a Czech pre-war car

Cookies & Datenschutz

Your satisfaction is our goal, which is why we use cookies. These enable our website to run reliably and securely, to keep an eye on performance and to be able to address you better.